After you do that, moving your right stick right or left should correspond to the movements of the green cross on the right stick of the controller image. The controller image in the middle of the x360ce window will start flashing, indicating that you need to move your right stick to the right.
Finally go to Stick Axis X under Right, click the down arrow and select Record. Now press the actual Right Trigger (lower back right button) on your gamepad - or anything else you might want to set as right trigger. Now go to Trigger under Right, click the down arrow and select Record. Now press the actual Left Trigger (lower back left button) on your gamepad - or anything else you might want to set as left trigger. First go to Trigger under Left, click the down arrow and select Record. In my case, the right stick is not recognised correctly, because its axes have been set as default buttons for the 2 triggers.
Move the sticks of your gamepad to check if the green cross on the controller image in the middle of the window follows your actions. Once you’ve run through all four calibrations, you can click “Finish” to move on to the testing portion of the process.E. Or, if you’re feeling handy, you can buy parts like thumbsticks online and replace them yourself. Unfortunately, while the software side of calibration does help you to find out how well your controller is responding to your movements–and even course correct for a faulty thumbstick to an extent–the only hardware fix when it starts to get worn down like this is to head down to the store and pick up a new controller altogether. RELATED: How to Control the Windows Desktop With an Xbox or Steam Controller As you can see in the example above, the X-axis of my right thumbstick actually rests around 52%, the product of old age and a lot of intense rounds of Halo Online.
Swing it up and down, and as long as you see the numbers “0%”, and “100% at the extremes of both the top and the bottom of the thumbstick’s range of motion (as well as resting in the middle at 50%), your controller is properly calibrated. The same goes for the Y-axis (vertical movement).
0 kommentar(er)
